- 14 surrounded Led lights
- Front torch
- Molle system tweezer
- Strong magnet
- Central turning axis
Available in two colours EB09.045 Light: White – red EB09.046 Light: White – blue
- Colour: standard white and another colour (Red or Blue depending on the model)
- Different flashing modes
- Battery: Polymer lithium battery
- Power protection: over charge, over discharge, over current, short circuit, super high temperature charging and discharging
- Working temperature: -35′(- +65’C)
- Voltage: 3.7(VDC)
- Battery content: 3. 7V, 500mah
- Charging time: < 3h
- Working time: > 2h Depending on the light pattern.
- Height resistance to dropping: 1.8m
- Power adapter: 5V, 1 A
- Long press button more than 2 sec, the light starts working
- When the light is on, press the button once, the pattern will change accordingly.
- The final pattern chose mode will be saved.
- When the light is turn on, press button twice and the spot light will be on.
- Long press button more than 2 sec, it will turn off the light.
- Charger working status: charging (red light on), full charge (green light on).
- When red or blue led (depending on the model) starts flashing slowly, it means the light needs to be charge.
Please read these instructions before using the product,
Do not open the light, it can only be repaired by Factory assigned people.
AII replacement parts must be provided by original manufacture.
This product has chemical content. Please discard according to local rules.
Battery and charging
- Please use specified power adaptor
- First insert the light into charger, then insert plug into charger
- Please do not charge when temperature is lower than-35 C0or higher than +65 C0